In order to join AlmaLinux (or any RHEL clone) to an AD, you need to install Samba and change the default authentication. Please make sure that the network configuration is set up correctly and you are using the AD DNS servers.

Step 1: Install prerequisities

$ apt install samba winbind libnss-winbind libpam-winbind

Step 2: Create samba config

Create a new file /etc/samba/smb.conf or change the given one with your favourite editor. (VI, NeoVIM, VIM, Nano…) and add following content. If you want the explanation for the config parameter, please visit the Samba Documentation.

[global]
    netbios name = <my host name here>
    realm = <my domain here, e.g. domain.local>
    workgroup = <my domain name without .local>
    security = ADS
    local master = no
    domain master = no
    allow trusted domains = no
    winbind use default domain = yes
    winbind enum groups = yes
    winbind enum users = yes
    winbind nss info = rfc2307
    winbind cache time = 300
    winbind offline logon = no
    idmap config * : range = 2000-9999
    idmap config * : backend = tdb
    template shell = /bin/sh

Step 3: Test config, start samba and join Ubuntu to the domain

Now let us test the samba config and start the SAMBA server only once, starting at boot will come later. If asked for a password, please enter it for the specified user.

$ testparm
$ systemctl start nmbd
$ systemctl start smbd
$ systemctl start winbind
$ net ads join -U Administrator
$ systemctl restart winbind

if successful, you can check the AD’s users and groups with wbinfo

$ wbinfo -u
$ wbinfo -g

Basically you should see all users and groups. Hurray, your box is now a domain member!

Step 4: Make the system use AD users for authentication

Next up, you need to change the authentication backend. Simply use following command to enable homefolder creation and windows authentication:

$ pam-auth-update

Then open /etc/nsswtich.conf and change the following lines:

passwd: compat systemd winbind
group: compat systemd winbind

Now check if PAM can read users and groups:

$ getent passwd
$ getent group

You should see all users and groups now. If you have domain trusts, users from other domains are going to be listed as well.

IMPORTANT: if using pam_mkhomedir.so samba home directories default to /home/<MY_DOMAIN>/<AD_USER>. The <MY_DOMAIN> folder needs to be created manually first!

Step 5: Configure OpenSSH and Sudo

Ok, all great so far. Now, let’s change OpenSSH to authenticate with AD and limit login only to domain admins in this case.

edit /etc/ssh/sshd_config and change or add the following lines:

PasswordAuthentication yes
ChallengeResponseAuthentication no
AllowGroups "domain admins" adm root

Next allow domain administrators to “sudo” commands (optional):

edit /etc/sudoers and change or add following lines:

%domain\ admins ALL=(ALL) NOPASSWD: ALL

Please be aware that NOPASSWD is used to suppress password confirmation when executing commands with sudo. It could be that you see that as a security risk. If so, simply remove “PASSWD:” from the line.

Step 6: Start samba and winbind at boot time

Last but not least, we need to start SAMBA at boot time. Simply execute following line:

$ systemctl enable nmbd
$ systemctl enable smbd
$ systemctl enable winbind

That should be it. Now reboot and use your Ubuntu box as an AD member.

In order to join AlmaLinux (or any RHEL clone) to an AD, you need to install Samba and change the default authentication. Please make sure that the network configuration is set up correctly and you are using the AD DNS servers.

Step 1: Install prerequisities

$ dnf install samba samba-client samba-winbind oddjobd oddjobd-mkhomedir

Step 2: Create samba config

Create a new file /etc/smb.conf or change the given one with your favourite editor. (VI, NeoVIM, VIM, Nano…) and add following content. If you want the explanation for the config parameter, please visit the Samba Documentation.

[global]
    netbios name = <my host name here>
    realm = <my domain here, e.g. domain.local>
    workgroup = <my domain name without .local>
    security = ADS
    local master = no
    domain master = no
    allow trusted domains = no
    winbind use default domain = yes
    winbind enum groups = yes
    winbind enum users = yes
    winbind nss info = rfc2307
    winbind cache time = 300
    winbind offline logon = no
    idmap config * : range = 2000-9999
    idmap config * : backend = tdb
    template shell = /bin/sh

Step 3: Test config, start samba and join AlmaLinux to the domain

Now let us test the samba config and start the SAMBA server only once, starting at boot will come later. If asked for a password, please enter it for the specified user.

$ testparm
$ systemctl start nmb
$ systemctl start smb
$ systemctl start winbind
$ net ads join -U Administrator
$ systemctl restart winbind

if successful, you can check the AD’s users and groups with wbinfo

$ wbinfo -u
$ wbinfo -g

Basically you should see all users and groups. Hurray, your box is now a domain member!

Step 4: Make the system use AD users for authentication

Next up, you need to change the authentication backend. Simply use following command:

$ authselect select winbind with-mkhomedir

Now check if PAM can read users and groups:

$ getent passwd
$ getent group

You should see all users and groups now. If you have domain trusts, users from other domains are going to be listed as well.

IMPORTANT: if using pam_mkhomedir.so samba home directories default to /home/<MY_DOMAIN>/<AD_USER>. The <MY_DOMAIN> folder needs to be created manually first!

Step 5: Configure OpenSSH and Sudo

Ok, all great so far. Now, let’s change OpenSSH to authenticate with AD and limit login only to domain admins in this case.

edit /etc/ssh/sshd_config and change or add the following lines:

PasswordAuthentication yes
ChallengeResponseAuthentication no
AllowGroups "domain admins" wheel root

Next allow domain administrators to “sudo” commands (optional):

edit /etc/sudoers and change or add following lines:

%domain\ admins ALL=(ALL) NOPASSWD: ALL

Please be aware that NOPASSWD is used to suppress password confirmation when executing commands with sudo. It could be that you see that as a security risk. If so, simply remove “PASSWD:” from the line.

Step 6: Start samba and winbind at boot time

Last but not least, we need to start SAMBA at boot time. Simply execute following line:

$ systemctl enable nmb
$ systemctl enable smb
$ systemctl enable winbind

That should be it. Now reboot and use your AlmaLinux box as an AD member.

In order to join FreeBSD to an AD, you need to change some PAM files and install Samba. Please make sure that the network configuration is set up correctly and you are using the AD DNS servers.

Step 1: Install prerequisities

$ pkg install samba413 pam_mkhomedir sudo

Step 2: Create samba config

Create a new file /usr/local/etc/smb4.conf with your favourite editor. (VI, NeoVIM, VIM, Nano…) and add following content. If you want the explanation for the config parameter, please visit the Samba Documentation.

[global]
    netbios name = <my host name here>
    realm = <my domain here, e.g. domain.local>
    workgroup = <my domain name without .local>
    security = ADS
    local master = no
    domain master = no
    allow trusted domains = no
    winbind use default domain = yes
    winbind enum groups = yes
    winbind enum users = yes
    winbind nss info = rfc2307
    winbind cache time = 300
    winbind offline logon = no
    idmap config * : range = 2000-9999
    idmap config * : backend = tdb
    template shell = /bin/sh

Step 3: Test config, start samba and join FreeBSD to the domain

Now let us test the samba config and start the SAMBA server only once, starting at boot will come later. If asked for a password, please enter it for the specified user.

$ testparm
$ service samba_server onestart
$ net ads join -U Administrator
$ service samba_server onerestart

if successful, you can check the AD’s users and groups with wbinfo

$ wbinfo -u
$ wbinfo -g 

Basically you should see all users and groups. Hurray, your box is now a domain member! or simply use:

$ wbinfo --online-status

Step 4: Make the system use AD users for authentication

Next up you the AD users accessible to PAM so that OpenSSH can use it as a backend.

Open and edit /etc/nsswitch.conf and change the following lines, both should contain compat as an initial value.

group: files winbind
passwd: files winbind

Great, next we must update PAM so that the AD user can be authenticated and its home folder is created automatically when he’s logging in for the first time. Change following fiiles: (be aware that order matters here, put the lines always before pam_unix.so lines and after the comment lines).

Please read PAM_WINBIND for more parameters and their meaning.

/etc/pam.d/sshd

auth sufficient /usr/local/lib/pam_winbind.so cached_login
account sufficient /usr/local/lib/pam_winbind.so
session optional /usr/local/lib/pam_mkhomedir.so
password sufficient /usr/local/lib/pam_winbind.so use_authtok

/etc/pam.d/system

auth sufficient /usr/local/lib/pam_winbind.so cached_login require_membership_of=<GROUP-SID>
account sufficient /usr/local/lib/pam_winbind.so
password sufficient /usr/local/lib/pam_winbind.so use_authtok

The require_membership_of parameter is needed to limit local TTY access only to a specific usergroup in case of physical server access. Here is how to find the SID for the “Domain Admins” group:

$ wbinfo --group-info="domain admins"
$ wbinfo --gid-to-sid=<use the GID from the previous command here>

Now check if PAM can read users and groups:

$ getent passwd
$ getent group

You should see all users and groups now. If you have domain trusts, users from other domains are going to be listed as well.

IMPORTANT: if using pam_mkhomedir.so samba home directories default to /home/<MY_DOMAIN>/<AD_USER>. The <MY_DOMAIN> folder needs to be created manually first!

$ mkdir /home/<MY_DOMAIN>

Step 5: Configure OpenSSH and Sudo

Ok, all great so far. Now, let’s change OpenSSH to authenticate with AD and limit login only to domain admins in this case.

edit /etc/ssh/sshd_config and change or add the following lines:

PasswordAuthentication yes
ChallengeResponseAuthentication no
AllowGroups "domain admins" wheel root

Next allow domain administrators to “sudo” commands (optional):

edit /usr/local/etc/sudoers and change or add following lines:

%domain\ admins ALL=(ALL) NOPASSWD: ALL

Please be aware that NOPASSWD is used to suppress password confirmation when executing commands with sudo. It could be that you see that as a security risk. If so, simply remove “PASSWD:” from the line.

Step 6: Start samba and winbind at boot time

Last but not least, we need to start SAMBA at boot time. Simply execute following line:

$ sysrc samba_server_enable="YES"
$ sysrc winbindd_enable="YES"

That should be it. Now reboot and use your FreeBSD box as an AD member.